Installation Notes:
Adjust the brake (page ) and drive
chain (page ).
Apply the brake several times and check
for free wheel rotation after the brake
pedal is released.
Rear axle nut torque:
Reverse the removal procedure.
Make sure that the lug ( ) on the
swingarm ( ) is located in the slot ( ) in
the brake panel.
(8)
(9)
(10)
18
68
9
810
(8) Slot
(9) Lug
(10) Swingarm
If a torque wrench was not used for
installation, see your Honda dealer as
soon as possible to verify proper as-
sembly. Improper assembly may lead
to loss of braking capacity.
80
88 N·m (9 kgf·m , 65 lbf·ft)
03/10/23 11:15:39 32KPF600_086
To Next Page
