uuAdjusting the SeatsuRear Seats
208
1. Store the center seat belt first. Insert the
latch plate into the slot on the side of the
anchor buckle.
2. Retract the seat belt into the holder on the
ceiling.
2 Seat Belt with Detachable Anchor P. 47
3. Lower the rear seat head restraint to its
lowest position. Put the armrest back into
the seat-back.
4. Pull the release lever and fold down the
seat.
4. Pull the release lever and fold down the
seat.
■
Folding Down the Rear Seats
1Folding Down the Rear Seats
The rear seat-backs can be folded down to
accommodate bulkier items in the cargo area.
Remove any items from the rear seat cushion and
floor before you fold down the rear seat.
Never drive with the seat-back folded down and the
tailgate open.
2 Exhaust Gas Hazard P. 80
When returning the seat-back to its original position,
push it firmly back. Also, make sure all rear shoulder
belts are positioned in front of the seat-back.
Make sure all items in the cargo area or items
extending through the opening into the rear
seats are properly secured. Loose items can fly
forward if you have to brake hard.
Make sure that the folded seat-back does not press
against the front passenger seat, as this can cause the
weight sensors in the front passenger seat to work
improperly.
2 Passenger Airbag Off Indicator P. 63
Make sure the seat-back, head restraints and seat
cushion are securely latched back into place before
driving.
21 CR-V PET ELP_MAP_HMIN_HCM-31TLA6400.book 208 ページ ２０２０年９月２日 水曜日 午後１時３５分
To Next Page
