4. Insert the key and turn the engine switch to the ON position. If the am-
bient temperature is below freezing, wait for the indicator lights to go
OFF before turning the key to the start position. This allows the glow
plugs to pre-heat the combustion chambers.
ON
5. Turn the engine switch to the START position and hold it there until the
engine starts.
m Operating the starter motor for more than 5 seconds can
damage the motor. If the engine fails to start, release the key,and wait at
least 10 seconds before operating the starter motor again.
ON
ENGINE SWITCH
START-
~
33
To Next Page
Loading...
