Fuse Replacement
Turn the engine switch OFF and remove the key before checking or replac-
ing fuses to prevent accidental short-circuiting.
To replace a sub fuse, pull the old fuse out of the clips with your fingers.
Push a new fuse into the clips.
If frequent fuse failure occurs, determine the cause and correct the pro-
blem before attempting to operate the generator.
If a main fuse is blown, see an authorized Honda generator dealer.
MAIN FUSE
SUB FUSE
5A
m Ne
ver use a fuse with a different rating from that specified.
Serious damage to the electrical system or fire may result.
To Next Page
Loading...
