Starting the engine
Before stating the engine:
1. Turn the fuel valve to the ON position.
2. Turn the AC circuit breaker to the OFF position.
3. Make sure the engine switch on the generator control panel is in the
OFF position and remove the key (see page 9).
AC ClRCUlT BREAKER
ON
4. Turn the remote control switch on the generator cover to the ON
position.
REMOTE CONTROL SWITCH ’
NOTE: When the remote control kit is installed, make sure the remote
control switch is in the OFF position when starting the engine with the
engine switch on the generator control panel.
58
To Next Page
Loading...
