29
OPERATION
2.Plug the appliance into the
receptacle.
3.Turn on the appliance.
If the generator is overloaded (see page 30), or if there is a short circuit
in a connected appliance, the overload alarm indicator (red) will go ON.
The overload alarm indicator (red) will stay ON, and after about four
seconds, current to the connected appliance(s) will shut off, and the
output indicator (green) will go OFF. Stop the engine and investigate
the problem.
Determine if the cause is a short circuit in a connected appliance or an
overload. Correct the problem and restart the generator.
31Z398000.book 29 ページ ２０１３年８月１日 木曜日 午後４時３６分
To Next Page
Loading...
