49
SERVICING YOUR GENERATOR
3.Use a brush to remove carbon deposits from the spark arrester
screen.
Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and tears. Replace the
spark arrester if it is damaged.
4.Check the muffler gasket; replace if damaged.
Reinstall the muffler gasket, the spark arrester, the muffler, and the
muffler protector in the reverse order of removal.
31Z398000.book 49 ページ ２０１３年８月１日 木曜日 午後４時３６分
To Next Page
