Fuel Sediment Cup Cleaning
The sediment cup prevents dirt or water which may be in the fuel tank
from entering the carburetor. If the engine has not been run for a long
time, the sediment cup should be cleaned.
1. Turn the fuel valve to OFF. Remove the sediment cup and O-ring.
2.Clean the sediment cup and O-ring in nonflammable or high flash
point solvent.
3. Reinstall the O-ring and sediment cup.
4. Turn the fuel valve ON and check for leaks.
FUEL VALVE
- O-RING
SEDIMENT CUP
34
To Next Page
