Changing of speed and mileage unit:
a
Press the SEL switch to select either “km/h”
and “km” or “mph” and “mile.”
b
Press and hold the SEL switch.
The speed and mileage unit are set, and
then the display returns to the ordinary
display.
The established setting can also be set by
turning the power switch to the (Off)
position.
The control is automatically switched from
the setting mode to the ordinary display if
the switch is not pressed for about 30
seconds. Even in this case, established setting
is maintained.
Operation Guide
32
Instruments (Continued)
To Next Page
Loading...
