Need help?Do you have a question about the Honda Urban Express NU50 1982 and is the answer not in the manual?
General| Brand | Honda |
|---|---|
| Model | Urban Express NU50 1982 |
| Category | Motorcycle |
| Language | English |
Safety precautions for operating and servicing the motorcycle.
Guidelines for using genuine parts, tools, and proper service procedures.
How to identify the specific Honda NU50/NU50M model and its serial numbers.
Technical data, dimensions, engine, and carburetor specifications for the NU50/NU50M.
Lists special and common tools required for servicing the motorcycle.
Specifies correct torque settings for engine and chassis fasteners.
Illustrates the correct routing of cables and wire harnesses on the motorcycle.
General service notes and specifications for the lubrication system.
Common lubrication problems and their potential causes and solutions.
Procedures for checking and changing the final reduction gear oil.
Instructions for removing, cleaning, and installing the oil tank.
Step-by-step guide to cleaning the oil strainer screen.
Procedures for removing, inspecting, and installing the oil pump.
Method for removing air from the oil pump and lines to ensure proper oil flow.
Identifies specific points on the engine and frame requiring lubrication.
General information and references for maintenance procedures.
Recommended intervals for inspecting, cleaning, adjusting, and replacing parts.
Procedures for inspecting and replacing fuel lines for deterioration or leaks.
Instructions for turning off the fuel valve, draining, and cleaning/replacing the fuel strainer.
Steps for removing, cleaning, or replacing the air cleaner element.
Procedure for removing, washing, and reinstalling the bystarter element.
Inspection, gap adjustment, and replacement of spark plugs.
Adjusting the throttle grip free play and cable.
How to adjust the oil pump control cable for proper lubrication delivery.
Procedure for setting the engine's idle speed using stop and air screws.
Checking and verifying the ignition timing using a timing light.
How to perform a compression test to check engine cylinder health.
Inspecting fluid level, specific gravity, and recharging or replacing the battery.
Adjusting brake lever free play and relocating the front brake arm.
How to inspect brake shoes for wear and determine when replacement is needed.
Checking front forks and rear swingarm bushings for proper operation and wear.
Adjusting steering head bearings for smooth handlebar rotation.
Adjusting the vertical and horizontal aim of the headlights.
Checking tire pressures, sizes, wear, and damage.
Ensuring all chassis nuts and bolts are tightened to correct torque values.
Diagram illustrating the components of the fuel system, primarily the carburetor.
To Next Page