#
When “hot” or “cold” is Flashing
If an abnormal temperature is detected, “hot”
or “cold” flashes to preserve the PCU or
motor. The power is limited, but you can still
drive. When the specified temperature is
reached, “hot” or “cold” goes off and the
power limitation is cancelled.
u
If the
READY
indicator goes off, you
cannot drive your vehicle.
Turn the power switch to the
(Off)
position, wait a little while, and then turn
the power switch to the
(On) position. If
the symptoms do not improve, contact
your authorised dealer.
#
When the Battery for Motor Gauge
is Flashing
Check the following item:
● Is the battery for motor installed correctly.
2 P. 44
#
When the Battery for Motor
Indicator Comes On
This comes on if there is an abnormality with
the battery for motor.
Contact your authorised dealer immediately.
Electric Vehicle Does Not Drive
Troubleshooting
74
To Next Page
Loading...
