32
STARTING THE ENGINE
STARTING THE ENGINE
Make sure that all appliances are disconnected from the AC
receptacles.
Turn the vent lever to the ON position.
To start a cold engine, move the choke lever to the CLOSED position.
To restart a warm engine, leave the choke lever in the OPEN position.
Pull the starter grip lightly until resistance is felt, then pull briskly.
Do not allow the starter grip to snap back against the engine. Return it
gently to prevent damage to the starter or housing.
If the choke lever was moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine warms
up.
Turn the engine switch to the ON position.
If you wish to use the EcoThrottle system, turn the EcoThrottle
switch to the ON position after the engine has warmed up for 2 or 3
minutes.
7.
6.
1.
2.
3.
4.
5.
TM TM
05/06/20 14:31:17 31ZT3604_033
To Next Page
Loading...
Need help?
General
