50
SERVICING YOUR GENERATOR
AIR CLEANER SERVICE
1.Loosen the maintenance cover
screw and remove the
maintenance cover.
2.Loosen the air cleaner cover
screw, and remove the air
cleaner cover.
3.Remove the main and outer
filters from the air cleaner housing.
4.Check the main and outer filters to be sure they are clean and in
good condition. If the main and outer filters are dirty, clean them as
described on page
52. Replace the main and outer filters if they are
damaged.
MAINTENANCE COVER
SCREW
MAINTENANCE COVER
MAIN FILTERMAIN FILTER
AIR CLEANER
COVER SCREW
OUTER FILTER
AIR CLEANER COVER
31Z39600.book 50 ページ ２０１３年４月１０日 水曜日 午前１０時３４分
To Next Page
