To Next Page
A
Amanda NicholsAug 19, 2025
How to fix under charged battery (batt) on Honda Engine?
- SShawn RiveraSep 12, 2025
If your Honda Engine displays 'batt' indicating an under charged battery, the suggested solution is to replace or recharge the battery.
How to fix under charged battery (batt) on Honda Engine?
If your Honda Engine displays 'batt' indicating an under charged battery, the suggested solution is to replace or recharge the battery.
What to do if my Honda Engine has insufficient oil?
If your Honda Engine has insufficient oil, it could be due to a low oil level. In this case, add the recommended oil to the proper level. Alternatively, it could be due to an abnormal issue, requiring you to replace the oil level switch, or replace or repair the engine wire harness and/or control wire harness.
Why does my Honda Engine show E-02 (Abnormal battery voltage)?
The E-02 error code on your Honda Engine indicates an abnormal battery voltage. This could be due to an issue with the battery itself, in which case you should replace or recharge the battery. It could also be due to a faulty ignition switch, so replace the ignition switch. Another potential cause is a problem with the engine wire harness or control wire harness, requiring you to replace or repair them.
What to do if Honda Engine displays E-01 (Starter motor switch input failure)?
If your Honda Engine displays error code E-01, indicating a starter motor switch input failure, the fuse may be blown, so replace the fuse. Alternatively, the ignition switch may be faulty, requiring replacement. Other potential causes include issues with the engine wire harness, control wire harness, remote control box, or remote control harness, all of which may need replacement or repair.
How to fix E-00 (Starter motor failure) in Honda Engine?
To fix the E-00 error (starter motor failure) in your Honda Engine, start by checking the battery; replace or recharge it if necessary. If the issue persists, adjust the ignition pulse generator air gap. If that doesn't work, consider replacing the ignition pulse generator, the wire harness, the starter motor, or the flywheel. It may also be necessary to replace or repair the engine wire harness and/or control wire harness.
What causes E-04 (Governor function failure) on Honda Engine?
The E-04 error on your Honda Engine indicates a governor function failure. This could be due to a faulty throttle control motor, requiring replacement. Alternatively, there might be an issue with the engine wire harness or control wire harness, necessitating replacement or repair. In some cases, the inverter unit may also be the cause and need replacement.
How to address E-03 (Engine temperature sensor failure) in Honda Engine?
To address the E-03 error (engine temperature sensor failure) in your Honda Engine, you should replace the engine temperature sensor. Additionally, inspect the engine wire harness and control wire harness for any damage, and replace or repair them as needed.
What to do for E-05, E-06 errors (GCU internal failure or inverter unit internal failure) in Honda Engine?
If your Honda Engine shows errors E-05 or E-06, indicating a GCU or inverter unit internal failure, you might need to replace the stator. Also, check the main wire harness and control wire harness for any issues and replace or repair them as necessary. The inverter unit itself may also be the problem, so consider replacing it.
What does it mean if Honda Engine displays E-12, E-13, E-22, E-23 (Inverter protection activated)?
If your Honda Engine displays error codes E-12, E-13, E-22, or E-23, it indicates that the inverter protection has been activated. Disconnect the AC appliance and stop the engine. Then, restart the engine and check the error code. It may also be necessary to replace the stator, main wire harness, generator wire harness or the inverter unit.
How to troubleshoot E-11, E-21 (Inverter internal communication error) on Honda Engine?
To troubleshoot E-11 or E-21 errors (inverter internal communication error) on your Honda Engine, consider replacing the stator. Also, inspect the generator wire harness and replace or repair it if necessary. If the problem persists, the inverter unit may need to be replaced.
General| Model | EU6500is |
|---|---|
| Category | Portable Generator |
| Rated Voltage | 120/240V |
| Rated Amperage | 45.8/22.9A |
| Inverter | Yes |
| Electric Start | Yes |
| Displacement | 389cc |
| Starting System | Electric and Recoil |
| Fuel Type | Gasoline |
| Rated AC Output | 5500W |
| Engine | Honda GX390 |
| Fuel Tank Capacity | 4.5 gal |
| Run Time per Tankful at 1/4 Load | 14.0 hrs |
| DC Output | 12V, 8A |
| Noise Level | 60 dB(A) |
| Engine Type | 4-stroke, OHV |
| Outlets | Two 120V 20A GFCI Duplex, One 120/240V 30A Locking Plug |
Guidance on making informed safety decisions and using good judgment during operation.
Operator duties, risks of carbon monoxide, and essential precautions.
Precautions against electric shock and burns from hot generator parts.
Instructions for safe gasoline handling and refueling to prevent fire and explosion.
Identification of critical warning labels on the generator for hazard awareness.
Details on the Oil Alert system, its function, and how to reset it.
Importance of checking the generator's condition before use to ensure safety and longevity.
Key safety rules for operating the generator, including ventilation and appliance connection.
Step-by-step guide for starting the generator using the engine switch and voltage selector.
Instructions for starting the generator using the optional remote control kit.
Steps for safely stopping the generator during normal operation or emergencies.
Instructions for stopping the generator using the optional remote control.
Guide to operating the generator with AC appliances and understanding overload indicators.
Connecting appliances, managing overload indicators, and troubleshooting common issues.
Crucial safety rules to follow before and during generator maintenance and repairs.
Table outlining regular service intervals for various generator components.
Step-by-step guide for refueling the generator safely, including warnings.
Procedure for checking the engine oil level using the dipstick and maintenance cover.
Detailed steps for draining and replacing the engine oil, including disposal notice.
Instructions for inspecting, gapping, and replacing the spark plug.
Safety warnings related to battery handling and emergency procedures for contact.
Common causes and corrections for the engine failing to start.
Possible causes and solutions when the generator engine lacks power.
Diagnosing and resolving issues where there is no power at the generator receptacles.
