61
STORAGE
Engine Oil
1.Change the engine oil (see page 48).
2.Remove the spark plug (see page 53), and pour approximately one
teaspoon (5 cc) of clean engine oil into the cylinder. Crank the engine
several revolutions to distribute the oil, then reinstall the spark plug.
3.Reinstall the spark plug cap on the spark plug securely.
4.Reinstall the spark plug maintenance cover.
5.Reinstall the maintenance cover and tighten the maintenance cover
screw securely.
6.Pull the starter grip (see page 25) slowly until you feel resistance,
then return the starter grip gently. This closes the valves so moisture
cannot enter.
31Z39600.book 61 ページ ２０１３年４月１０日 水曜日 午前１０時３４分
To Next Page
