Do you have a question about the Honda GCV170 and is the answer not in the manual?
Compression Ratio | 8.5:1 |
---|---|
PTO Shaft Rotation | Counterclockwise (from PTO shaft side) |
Air Cleaner | Dual element |
Lubrication System | Splash |
Fuel | Unleaded gasoline (86 octane or higher) |
Cooling System | Forced air |
Ignition System | Transistorized magneto |
Starting System | Recoil Starter |
Engine Type | 4-stroke, single-cylinder |
Displacement | 166 cm³ |
Net Power Output | 3.4 kW (4.6 hp) @ 3, 600 rpm |
Oil Capacity | 0.42 U.S. quarts (0.41 liters) |
Key safety warnings regarding fuel hazards, exhaust emissions, and general operating precautions.
Identifies key engine components and controls with numbered diagrams and a comprehensive list.
Illustrates different engine control types (manual/auto choke, fixed/remote throttle) with labels.
Visual guide showing the correct positions for the fuel valve (ON/OFF).
Explains how to operate the fuel valve and choke for starting and warm-up.
Details the operation of the flywheel brake lever and the starter grip for engine starting.
Illustrates control lever positions for speed adjustment and engine stopping.
Illustrates how to check fuel tank cap, filler neck, and oil dipstick with level markings.
Provides ambient temperature chart and flywheel brake lever clearance check guidance.
Details air cleaner parts (cover, element, case, duct) and their maintenance.
Illustrates spark plug, wrench, and various fasteners used in engine assembly.
Shows fuel tank cap, starter grip, and top cover for access and operation.
Details muffler protector, spark arrester, and screen for exhaust management.
Illustrates fuel valve, float chamber, and drain bolt for fuel system maintenance.
Essential safety guidelines, warnings, and hazard symbol explanations for safe operation.
Procedures to ensure the engine is safe and ready for operation before starting.
Guidelines for safe engine operation, including environmental hazards and slope limits.
Detailed steps for starting and stopping engines based on specific control types.
Highlights the necessity of maintenance and essential safety measures for engine longevity.
Details maintenance intervals and proper procedures for refueling the engine safely.
Guidance on selecting, checking, and changing engine oil for optimal performance.
Steps for inspecting and cleaning the air filter to prevent premature engine wear.
Information on the correct spark plug and its maintenance requirements.
Detailed instructions for installing and tightening the spark plug correctly.
Procedures for checking the flywheel brake and servicing the spark arrester.
Steps for preparing the engine for storage, including cleaning and fuel/oil management.
Guidelines for storing the engine safely and for its removal from storage.
Instructions for transporting the engine and troubleshooting common starting/power issues.
Details technical info, altitude effects on carburetors, and interference compliance.
Information on emission control systems and warnings against tampering.
Detailed specifications for both GCV170 and GCV200 engine models.
Specific tune-up data including spark plug gap, idle speed, and valve clearance.
Concise summary of key information for fuel, oil, spark plug, maintenance, and wiring diagrams.
Information on locating dealers, obtaining manuals, and customer service contact details.
Tips for preventing fuel deterioration and system damage during operation and storage.
Details warranty coverage, eligibility, service procedures, and what Honda repairs/replaces.
Lists common warranty exclusions, disclaimers, and limitations for US warranty claims.
Details warranty terms, owner responsibilities, and service procedures for Canadian engines.
Information on warranty exclusions, replacement parts, and consumer notices.
Details California emissions warranty rights, owner responsibilities, and manufacturer coverage.
Covers warranty for other regions, general exclusions, disclaimers, and specific warrantied parts.
Contact information for Honda service and dealers across various countries in Central/South America.
Procedures for international warranty service and a list of common warranty exclusions.
Specific list of conditions and parts not covered by the international warranty.