EasyManua.ls Logo

Honda Goldwing GL1200 User Manual

Honda Goldwing GL1200
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Motorcycle
Electronic Cruise Control
Installation Manual ©
For Honda Goldwing
GL1200
7 June, 1999
Manufactured by -
MotorCycle Setup Pty. Ltd.
7 Moritz Street, Box Hill, Victoria, AUSTRALIA, 3128
Question and Answer IconNeed help?

Do you have a question about the Honda Goldwing GL1200 and is the answer not in the manual?

Honda Goldwing GL1200 Specifications

General IconGeneral
Displacement1182 cc
Compression Ratio9.0:1
IgnitionElectronic
Transmission5-speed
Final DriveShaft
Front SuspensionTelescopic fork
Front BrakesDual disc
Rear BrakesSingle disc
Engine TypeLiquid-cooled, 4-stroke, horizontally opposed 4-cylinder
Fuel SystemCarburetor

Summary

Preparing the Bike for Installation

Installation Procedures

Installing the Carburettor Cable

Mounting and adjusting the new carburettor cable.

Installing the Actuator

Mounting the vacuum actuator assembly to the motorcycle frame.

Installing the Actuator Vacuum Hose

Connecting the vacuum hose to the actuator and inlet manifold.

Installing the CIU

Mounting the Cable Interface Unit (CIU) to the frame.

Adjusting the Carburettor Cable

Setting the correct free play for the carburettor cable at the CIU.

Adjusting the Throttle Grip Free Play

Adjusting free play at the throttle grip for smooth operation.

Sensor Magnet Installation

Installing the speed sensor magnet assembly onto the brake disc.

Installing the Electronic Clutch Switch (ECS)

Installing the Electronic Clutch Switch (ECS) and understanding its function.

Diagnostic Mode Operation

Performing Diagnostic Checks

Step-by-step guide for operating the cruise control in diagnostic mode.

Checking Speed Sensor and ECS

Procedures to verify speed sensor and Electronic Clutch Switch (ECS) functionality.

Brake Pedal and Lever Adjustments

Operating the Cruise Control

SET Key Functions

How to use the SET key to set speed, accelerate, and enter diagnostic mode.

RES Key Functions

How to use the RES key to resume speed or decelerate.

Safety Features and Considerations

CruiseSafe Actuator Power Relay

Description of the safety relay that cuts power upon braking.

Road Test and Adjustments

Performing Road Test

Procedure to test cruise control engagement and speed maintenance.

Trouble Shooting and Diagnostics

Troubleshooting Common Issues

Guidance on addressing common problems and initial user disorientation.

Related product manuals