Need help?Do you have a question about the Honda HRC VTR1000 SP-1 and is the answer not in the manual?
General| Displacement | 999 cc |
|---|---|
| Compression Ratio | 10.8:1 |
| Fuel System | PGM-FI electronic fuel injection |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Brakes | Dual 320 mm discs with 4-piston calipers |
| Rear Brakes | Single 220 mm disc with 1-piston caliper |
| Front Tire | 120/70-ZR17 |
| Rear Tire | 190/50-ZR17 |
| Engine Type | 4-stroke, 90° V-twin |
| Bore x Stroke | 98 mm x 66 mm |
| Ignition | Computer-controlled digital |
| Front Suspension | 43 mm inverted fork, adjustable |
| Rear Suspension | Pro-Link, adjustable |
| Wheelbase | 1410 mm (55.5 inches) |
| Seat Height | 820 mm (32.3 inches) |
| Fuel Capacity | 18 liters (4.8 US gallons) |
Information on fuel requirements and refueling procedures for the motorcycle.
Details on the coolant system, checking levels, and filling procedures.
Guidance on starting the engine, break-in procedures, and general operation.
Comprehensive technical specifications and dimensions for the motorcycle.
Recommended torque specifications for various fasteners during assembly and maintenance.
Outlines the recommended maintenance intervals and specific service tasks.
Essential checks to perform before each ride to ensure safety and proper function.
Procedures for checking and changing engine oil and filter for optimal performance.
Information regarding inspection and maintenance of the motorcycle's brake system.
Steps for inspecting fuel lines and pressure.
Guidance on diagnosing and resolving issues with the PGM-FI system using fault codes.
Detailed instructions for removing the camshaft assembly.
Procedures for assembling the cylinder head, including seals and components.
Instructions for removing and installing the front wheel.
Maintenance procedures and adjustments for the front fork assembly.
Information on battery maintenance, charging, and inspection.
Steps for inspecting the alternator and its related components.
To Next Page