253
uuColour AudiouPlaying AM/FM Radio
■
Traffic announcement (TA) button
TA standby function allows the system to stand by for traffic announcements in any
mode. The last tuned station must be an RDS-capable traffic programme station.
To turn the function on: Press the TA button. When a traffic announcement
begins on your last tuned station, the system automatically switches to the FM
mode. TA-INFO appears on the audio/information screen. The system returns to your
last selected mode after the traffic announcement is finished.
If you want to go back to your last selected mode during the traffic announcement,
press the TA button again.
To cancel the function: Press the TA button.
1Radio Data System (RDS)
TA
When you press the TA button, the TA indicator
appears on the audio/information screen.
If you select Scan while the TA standby function is
on, the system searches TP station only.
Pressing the TA button while the traffic
announcement is on does not cancel the TA standby
function.
21 JAZZ HYBRID SSS-32TZA6000.book 253 ページ ２０２０年１月２９日 水曜日 午前１０時３２分
To Next Page
Loading...
