Honda Nighthawk CB 750 1996 - User Manual

Covers safety precautions related to engine operation and components.

Details how to identify the motorcycle's serial and identification numbers.

Lists technical specifications for various motorcycle components.

General information and warnings for frame, body, and exhaust systems.

Lists common problems and causes for frame, body, and exhaust systems.

Procedure for removing and installing the exhaust system.

General information regarding maintenance procedures.

Outlines recommended maintenance intervals based on mileage or time.

General information and warnings for the lubrication system.

Lists common lubrication system problems and their causes.

Procedure for checking the engine oil pressure.

General information and warnings for the fuel system.

Lists common fuel system problems and their causes.

Procedure for removing and installing the carburetors.

General info on components serviced with engine in or out of frame.

General info on camshaft service and valve adjustments.

Diagnosing engine top-end problems and related symptoms.

Procedure for removing and installing the camshaft.

General info on clutch maintenance and related issues.

Lists common clutch and gearshift problems and their causes.

Procedure for removing the clutch assembly.

Covers crankcase separation, servicing crankshaft, transmission, alternator shaft.

Lists common problems related to crankshaft, transmission, and engine vibration.

Procedure for separating the engine crankcases.

Safety warnings regarding brake dust and servicing suspension.

Lists common problems related to steering, wheels, and suspension.

Procedure for disassembling the front fork.

Safety warnings regarding brake dust and servicing suspension.

Lists common problems related to suspension and wheel alignment.

Procedure for removing and installing the rear shock absorber.

Safety warnings about brake dust, fluid, and system operation.

Lists common brake system problems and their causes.

Procedure for removing and installing the front brake caliper.

Warnings and component references for the charging system.

Diagnosing battery overcharging and undercharging issues.

Procedure for removing and installing the motorcycle battery.

General info and warnings for the ignition system.

Diagnosing ignition system problems and no spark issues.

Procedure for checking and adjusting ignition timing.

Warnings and component references for the electric starter system.

Diagnosing starter motor and related circuit issues.

Procedure for removing and installing the starter motor.

Safety warnings and component inspection references.

Shows the location of lights, meters, and switches.

Procedure for removing and installing the meter assembly.

Diagnosing issues when the engine won't start or starts hard.

Troubleshooting steps for reduced engine power.

Addressing issues with low speed and idle performance.

Diagnosing issues with steering and motorcycle handling.