Honda PCX 150 User Manual

Crankcase Breather
Cleaning the Crankcase
Breather
1. Place a suitable container under the
crankcase breather tube.
2. Place a suitable container under the
crankcase breather plug.
3.
Remove the crankcase breather tube plug
from the tube.
4. Remove the crankcase breather plug from
the air cleaner case.
5. Drain deposits into a suitable container.
6. Install the crankcase breather tube plug.
7. Install the crankcase breather plug.
20180912083000_32K97Q000_eng_BOOK Page 108 Wednesday, September 12 2018 08:36:26 JST
Maintenance
103
Crankcase breather
tube plug
Crankcase breather plug

Honda PCX 150 Specifications

General

Displacement	149cc
Bore x Stroke	57.3mm x 57.9mm
Compression Ratio	10.6:1
Fuel System	PGM-FI electronic fuel injection
Ignition	Full transistorized ignition
Transmission	Automatic V-Matic
Front Suspension	31mm telescopic fork
Front Brake	Hydraulic disc
Rear Brake	Mechanical drum
Front Tire	100/80-14
Rear Tire	120/70-14
Wheelbase	51.8 inches
Seat Height	30.1 inches
Fuel Capacity	2.1 gallons
Starter	Electric
Front Brake Disc Size	220mm
Rear Brake Drum Size	130mm
Rear Suspension	Twin shock