EasyManua.ls Logo

Honda PCX150 2014 User Manual

Honda PCX150 2014
436 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Honda PCX150 2014 and is the answer not in the manual?

Honda PCX150 2014 Specifications

General IconGeneral
Displacement153cc
Bore x Stroke58.0mm x 57.9mm
Compression Ratio10.6:1
Fuel SystemPGM-FI electronic fuel injection
StarterElectric
TransmissionAutomatic V-Matic belt drive
Rear SuspensionTwin shock
Rear BrakeDrum
Front Tire90/90-14
Rear Tire100/90-14
Wheelbase51.8 inches
Front Suspension31mm telescopic fork
Engine TypeLiquid-cooled 4-stroke single
Front BrakeSingle 220mm disc with hydraulic two-piston caliper

Summary

General Information

Frame, Body Panels, and Exhaust System

Maintenance

Maintenance Schedule ('13 Model)

Detailed maintenance schedule for the '13 model, including intervals and tasks.

Spark Plug

Procedures for removing, inspecting, cleaning, and installing the spark plug.

Valve Clearance

Instructions for inspecting and adjusting valve clearance while the engine is cold.

Engine Oil

Procedures for checking engine oil level and changing engine oil.

PGM-FI System

PGM-FI Symptom Troubleshooting ('13 Model)

Guides for diagnosing symptoms related to the PGM-FI system for the '13 model.

DTC Index ('13 Model)

Index of Diagnostic Trouble Codes (DTCs) for the PGM-FI system on the '13 model.

DTC 1-1 (MAP Sensor Low Voltage)

Troubleshooting steps for PGM-FI DTC 1-1 related to MAP sensor low voltage.

Ignition System

Ignition Coil Primary Peak Voltage

Procedure for measuring the ignition coil primary peak voltage.

Electric Starter

Starter/Charging Relay Inspection

Procedures for inspecting the operation and line continuity of the starter/charging relay.

Fuel System

Fuel Pressure Test

Procedure for testing fuel pressure using a fuel pressure gauge and manifold.

Fuel Pump Unit Inspection

Steps for inspecting the fuel pump unit's operation and voltage supply.

Throttle Body Removal

Detailed steps for removing the throttle body, including sensor unit and IACV.

Lubrication System

Oil Pump Removal

Detailed steps for removing the oil pump assembly from the engine.

Cooling System

Coolant Replacement/Air Bleeding

Procedures for replacing coolant and bleeding air from the cooling system.

Water Pump/Thermostat

Procedures for inspecting and servicing the water pump and thermostat assembly.

Cylinder Head and Valves

Cylinder Compression Test

Procedure for performing a compression test to diagnose engine performance.

Cylinder and Piston

Drive Pulley, Driven Pulley, and Clutch

Final Reduction

Alternator/Starter

Crankcase/Crankshaft

Engine Removal/Installation

Front Wheel, Suspension, and Steering

Rear Wheel, Brake, and Suspension

Hydraulic Brake

Battery/Charging System

Troubleshooting

Diagnoses battery issues like damage, weak condition, and current leakage.

Lights, Meters, and Switches

Wiring Diagram

Related product manuals