Do you have a question about the Honda PCX150 2017 and is the answer not in the manual?
Displacement | 149cc |
---|---|
Bore x Stroke | 57.3mm x 57.9mm |
Compression Ratio | 10.6:1 |
Fuel System | PGM-FI electronic fuel injection |
Ignition | Fully transistorized |
Transmission | Automatic V-Matic belt drive |
Front Tire | 90/90-14 |
Rear Tire | 100/90-14 |
Wheelbase | 51.8 inches |
Seat Height | 29.9 inches |
Curb Weight | 295 pounds |
Fuel Capacity | 2.1 gallons |
Height | 43.5 inches |
Engine Type | Liquid-cooled, 4-stroke, single-cylinder |
Front Suspension | 31mm telescopic fork |
Rear Suspension | Twin shock |
Front Brake | 220mm hydraulic disc |
Rear Brake | Single 130mm drum |
Specified torque values for fasteners.
Scheduled maintenance intervals and tasks for the '13 model.
Inspection and adjustment procedures for valve clearance.
Procedures for checking and changing engine oil.
Procedures for checking and replacing brake fluid.
Testing fuel supply system performance for models after '13.
Procedures for removing, installing, and inspecting the fuel injector.
Procedures for replacing coolant and bleeding air from the system.
Procedure for performing a cylinder compression test.
Inspection and refacing procedures for valve seats.
Procedures for replacing bearings in the final reduction case.
Procedures for removing the engine from the frame.
Procedures for installing the engine into the frame.
Procedures for removing, disassembling, and inspecting the front fork.
Procedures for replacing brake fluid and bleeding the system.
Wiring diagram for the battery and charging system.
Troubleshooting common battery and charging system problems.
Electrical wiring diagram for the '13 model.
Electrical wiring diagram for models after '13.