Honda Pilot 2004 - Installing a Child Seat Using LATCH

Move the seat belt buckle or
tongue away from the lower
anchors.
Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and
anchors.
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for Children) at the second
row seats. The lower anchors are
located between the seat-back and
seat bottom, and are to be used only
with a child seat designed for use
with LATCH.
The location of each lower anchor is
marked with a small circle above the
point.
To install a LATCH-compatible child
seat:
The following pages provide
guidelines on how to properly install
a child seat. A forward-facing child
seat is used in all examples, but the
instructions are the same for a rear-
facing child seat.
Make sure the child is properly
strappedinthechildseat
according to the child seat maker’s
instructions. A child who is not
properly secured in a child seat
can be seriously injured in a crash.
A child seat secured with a seat belt
should be installed as firmly as
possible. However, it does not need
to be ‘‘rock solid’’. Some side-to-side
movement can be expected and
should not reduce the child seat’s
effectiveness.
If the child seat is not secure, try
installing it in a different seating
position, or use a different style of
child seat that can be firmly secured.
1.
2.
Installing a Child Seat
Driver and Passenger Safety
Installing a Child Seat Using
LATCH
Secure the child in the child seat.3.
33
LOWER
ANCHORS
Information Provided by: