Honda Pilot 2004 - Seats

−
To change the lumbar support, move
the lever on the right side of the
seat-back forward or backward.
Keep moving the lever forward or
backward until you find a suitable
position.
The controls for the power
adjustable driver’s seat are on the
outside edge of the seat bottom. You
can adjust the power seat with the
ignition switch in any position. Make
all seat adjustments before you start
driving.
Moving the long horizontal switch
adjusts the seat bottom in several
directions. The seat bottom adjusts
in the direction you move the switch.
The short vertical switch adjusts the
seat back angle.
Adjusts the seat-back
angle forward or
backward.
Raises or lowers the
seat.
Moves the front of the
seat up or down and
the rear of the seat up
or down.
Moves the seat
forward and backward.
See pages for important safety
information and warnings about how to
properly position seats and seat-backs.
On EX modelOn EX model
1110
Seats
Instruments and Controls
Driver’s Lumbar SupportPower Seat Adjustment
68
Information Provided by: