To change the angle of the seats in
the second row seat-backs, pull up
the handle on the seat-back. Moving
the short vertical switch forward or
backward adjusts the seat back in
those directions.
The left and right halves can be
folded separately.
Push the whole seat backwards until
fully latches. Make sure the seat is
locked and secured before driving.
If you are folding the left half of
the seat, use the ignition key to
release the center seat belt from
thedetachableanchor(seepage
).
Lower the head restraint fully.
Pull up the handle on the outside
of the seat-back.
Fold the seat-back forward.
Reverse this procedure to return the
seat to its upright position. Make
sure the seat is locked and secured
before driving.
To get into the third row seats, pull
up the lever on the outside of the
passenger’s side second row seat-
back. The seat-back will tilt forward,
and the seat will slide forward.
To adjust the seats forward and
backward, pull up on the lever under
the seat cushion. After moving the
seat, make sure it is locked into
position.
2.
3.
1.
4.
72
Seats
Instruments and Controls
Adjusting the Second Row Seats Folding the Second Row Seats Third Seat Access
70
SECOND
ROW SEAT
RELEASE LEVER
To Next Page
Loading...
