Honda Pilot 2016 - Page 170

169
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
*
Controls
1. Set the power mode to ON. Adjust the
driver’s seat and the door mirrors to the
desired position.
2. Press the SET button.
u You will hear a beep, and the memory
button indicator light will blink.
3. Press memory button
(1 or (2 within five
seconds of pressing the SET button.
u Once the seat and the outside mirror
positions have been memorized, the
indicator light on the button you pressed
stays on.
1. Select
(P.
2. Apply the parking brake.
3. Press a memory button (
(1 or (2).
u You will hear a beep, and the indicator
light will blink.
The seat and the door mirrors will
automatically move to the memorized
positions. When it has finished moving, you
will hear the beep, and the indicator light
stays on.
■
Storing a Position in Memory
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat or the outside mirror position
before the double-beep.
• You set the power mode to any position except
ON.
Memory Button 1
Memory Button 2SET Button
■
Recalling the Stored Position
1Recalling the Stored Position
The seat will stop moving if you:
• Press the SET button, or a memory button ((1 or
(2).
• Adjust the seat or the door mirror position.
• Select into any position except (P.
Memory Buttons
16 PILOT-31TG76000.book 169 ページ ２０１６年１０月１９日 水曜日 午後５時４分