279
uuAudio System Basic OperationuPlaying SiriusXM® Radio
Sample each channel on the selected mode for 10 seconds.
1. Select Scan.
2. Select Scan Channels.
u You can select the desired channel by songs using Scan Songs in Presets.
To turn off scan, select Cancel.
If your iPhone/iPod is connected to the USB port, you can store the TAG information.
If the iPod/iPhone is not connected to the audio system, the information is stored in
the audio system temporarily. Once the device is connected to the system, data is
transferred to the iPod/iPhone.
To store the TAG information to the iPod/iPhone, or the audio system, select TAG.
Displays the TAG information saved to the audio system.
1. Select .
2. Select Tagged Song List.
■
Scan
■
Tag Song to Device
■
Tagged Song List
1Scan
The “Scan Songs in Presets” function is based on
TuneScan
TM
technology of SiriusXM®.
The “Featured Channels” function is based on
Featured Favorites
TM
technology of SiriusXM®.
TuneScan
TM
and Featured Favorites
TM
are registered
trademarks of SiriusXM® Radio, Inc.
16 PILOT-31TG76000.book 279 ページ 2016年10月19日 水曜日 午後5時4分