3.
Disconnect the negative - terminal from
the battery.
4.
Disconnect the positive + terminal from
the battery.
5.
Remove the battery, taking care not to
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure bolts and nuts are
tight.
Make sure the clock information is correct
after the battery is reconnected. 2 P. 27
The anti-theft alarm system will be
deactivated if the battery is disconnected.
The system will remain off when the battery is
reconnected.
To activate the system, ”Setting the Anti-theft
Alarm System.” 2 P. 45
For proper handling of the battery, see
“Maintenance Fundamentals.” 2 P. 83
“Battery Goes Dead.” 2 P. 126
20230106100355_32K2FD100_eng_BOOK Page 96 Friday, January 06 2023 10:07:46 JST
Removing & Installing Body Components u Battery
Maintenance
93
To Next Page
Loading...
