Electrical Trouble u Burned-out Light Bulb
87
continued
#
Headlight Bulb
1.
Remove the headlight case. 2 P. 51
2.
Remove the rubber cover.
3.
Slightly press down on the pin and turn it
clockwise until it releases from the
headlight bulb housing.
4.
Remove the bulb.
5.
Install a new bulb and parts in the reverse
order of removal.
u Install the rubber cover with its “
3” mark
facing up.
Do not touch the glass surface with your
fingers. If you touch the bulb with your bare
hands, clean it with a cloth moistened with
alcohol.
Bulb
“3“ mark
Rubber cover
20 AFS110MD MCS (MA)-32K71A200.book Page 87 Wednesday, October 16, 2019 5:41 PM
To Next Page
