Proper shifting can prevent damaging the
engine and transmission.
Upshifting
The upper limit speed of each gear is shown
in gear range. (P.
16)
Upshift to a higher gear before exceeding
the upper limit speed.
Upshifting at speeds higher than the upper
limit speed can cause damage to the engine.
Downshifting
Downshifting at speeds higher than those in
the table below may overrev the engine and
can cause damage to the engine and
transmission.
Follow the table below when downshifting
the gears.
Downshifting Acceptable Speed
From 4th to 3rd 70 km/h (43 mph) or less
From 3rd to 2nd 50 km/h (31 mph) or less
From 2nd to 1st 25 km/h (16 mph) or less
20181207113539_32KVMC000_eng_BOOK Page 29 Friday, December 07 2018 11:40:26 JST
Operation Guide
26
Shifting Gears (Continued)
To Next Page
Loading...
