#
Removal
Make sure the ignition switch is in the OFF
position.
1.
Open the seat. 2 P. 29
2.
Remove the battery cover by removing
the clip. 2 P. 49
3.
Disconnect the negative - terminal from
the battery.
4.
Disconnect the positive + terminal from
the battery.
5.
Remove the battery taking care not to
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
For proper handling of the battery, see
“Maintenance Fundamentals.” 2 P. 37
“Battery Goes Dead.” 2 P. 82
20181207113539_32KVMC000_eng_BOOK Page 51 Friday, December 07 2018 11:40:26 JST
Removing & Installing Body Components u Battery
Maintenance
48
To Next Page
Loading...
