6
HYF290 SERIES FAN OPERATION - 8 SPEEDS
Power Cool
Cool
Refresh
Relax
White Noise
Calm
Whisper
Sleep
1
2
4
8
Model HYF290 Series
ON/OFF
To turn fan on, press the Power button ( ) located on
the bottom center of the control panel.
SPEED CONTROL
The fan will automatically start on “Sleep” speed when initially
turned on. To adjust the speed up or down, press the
Fan Speed button (
) repeatedly to increase level.
OSCILLATION
To activate the Oscillation feature, press the Oscillation button ( )
once. Press the Oscillation button again to turn the Oscillation
feature off.
TIMER
Choose from 1, 2, 4, or 8 hour settings by performing
the following function:
• 1 hour: Press the Timer button (
) once.
• 2 hours: Press the Timer button (
) twice.
• 4 hours: Press the Timer button (
) a third time.
• 8 hours: Press the Timer button (
) a fourth time.
Press the Timer button a fifth time to turn the Timer feature off.
NIGHTTIME LIGHT DIMMING FEATURE
Each time the fan is powered on ( ) the control panel light
will be set at 100% brightness.
Choose from 5 settings for your control panel lighting preference:
• Press the Light button (
) once for 75% brightness.
• Press the Light button (
) twice for 50% brightness.
• Press the Light button (
) a third time for 25% brightness.
• Press the Light button (
) a fourth time for no light.
• Press the Light button (
) a fifth time for 100% brightness.
To Next Page
Loading...
Need help?
General
