Honeywell Home RTH5160D1003 User Manual

RTH5160 Series
Non-Programmable
Thermostat
RTH5160D1003
Quick Installation Guide
Heat On
Menu
Fan Auto
Tools you will need Tools you may need
Wire stripper
Needle-nose pliers
Drill and
drill bit
Included in your box
Screws and
anchors
UWP™
Mounting
System
(UWP)
RTH5160
Thermostat
Quick Install Guide
Small flat head scr
ewdriver
Phillips scr
ewdriver
Pencil
Level

Honeywell Home RTH5160D1003 Specifications

General

Display	Digital
Programmable	Non-programmable
Power Source	Battery
Backlight	Yes
Battery	2 AA batteries
Voltage	24V
Hold Feature	Yes
Filter Change Alert	No
Color	White
Temperature Range	40°F to 90°F

Summary

Removing Your Old Thermostat

Power Off and System Check

Ensures power is off and the heating/cooling system is inactive before removal.

Faceplate Removal and Wire Inspection

Thermostat Wiring and Setup

Set R-Switch and Connect R-Wires

Explains how to set the R-switch and insert the R-wire(s) into the terminal.

Connecting Remaining Wires and Mounting

Connect Remaining Wires

Final Installation Steps

Turn Power ON

Instructs on restoring power to the heating/cooling system.

System Setup Configuration

Select System Setup Options

Details how to navigate and select system setup options using the thermostat controls.

System Setup Options Details

Provides a list and descriptions of available system setup numbers and options.

Operation and Fan Settings

System Operation Settings

Explains how to set the thermostat's operating mode (Auto, Heat, Cool, etc.).

Fan Operation Settings

Wiring Diagrams and Notes

Alternate Wiring for Conventional Systems

Wiring for Heat Pump Systems

Advanced Wiring and Battery Replacement

Alternate Wiring for Heat Pumps

Alerts and Troubleshooting

Alerts Screen and Codes

Explains how to view alert icons and defines common alert codes.

Troubleshooting Common Issues

Provides solutions for common problems like blank display or system response issues.