Need help?Do you have a question about the Honeywell Home RTH6580WF and is the answer not in the manual?
General| Model | RTH6580WF |
|---|---|
| Type | Wi-Fi Thermostat |
| Connectivity | Wi-Fi |
| Programmability | 7-day programmable |
| Voltage | 24V |
| Stages | 1 Heat/1 Cool |
| Energy Star Certified | No |
| Compatibility | Works with most heating and cooling systems, including gas, electric, and heat pumps |
| Display | Backlit digital display |
| Power Source | Battery or C-wire |
| Remote Access | Yes, via Honeywell Home app |
Turn off power to the heating/cooling system at the breaker box or system switch.
Remove the old thermostat faceplate, label wires, and disconnect wires.
Mount the wallplate, connect wires, install the quick reference card, and attach the thermostat.
Switch the heating/cooling system ON and set the date and time on the thermostat.
Set the heating/cooling system type correctly for proper operation and to avoid damage.
Test thermostat operation by changing to heating or cooling mode.
Connect to the thermostat's network and then your home network.
Register your Wi-Fi thermostat on the Total Connect Comfort website.
Details the switch's capability to control lights and motors for various load types.
Steps for installing the switch, including power cutoff and wiring.
Setting time/date and understanding indicators for daily operation.
Guide to accessing and using Mode, Time, Configuration, and Program menus.
Details the one-year warranty against defects in workmanship or materials.
Addresses display problems, inaccurate times, and incorrect settings.
Provides details on voltage, load, temperature range, and certifications.
To Next Page