QUICK START GUIDE HONEYWELL 1031030 AND UVEX S0550X EYEWEAR
________________________________________________________________________________
OPERATING CONTROLS:
GETTING TO KNOW YOUR EYEWEAR:
Your safety eyewear allows you to communicate with your cellular or smart phone, and any other Bluetooth enabled voice
communication product. It also allows you to listen to stereo music from any Bluetooth enabled music-play device.
‘Bluetooth’ is the method of radio communication many products use to communicate short distances without wires.
USING YOUR EYEWEAR FOR THE FIRST TIME:
First, prepare your eyewear to be connected to your cell or smart phone. Turn it on by pressing the ‘Function’ button and prepare it to
‘Pair’ for the first time. ‘Pair’ means that your eyewear, and only yours, is connected to your cell phone or another device of your choice,
and only that device. Turn the eyewear on and off by using the ‘Function’ button indicated in the picture.
To prepare to 'Pair', turn your eyewear off, as indicated by the function button not blinking any color.
Turn the eyewear off by pressing and holding the ‘Function’ button for 5-8 seconds, during which it will blink blue 3 times, blink red 3
times, and turn itself off. Release the Function button. The eyewear is off when the ‘Function’ button is no longer blinking.
To ‘Pair’, press and hold the ‘Function’ button until the blue light stays on continuously. It will first blink blue, but you must continue to
hold the ‘Function’ button down until the blue light is on continuously.
Turn your cell phone or music player's Bluetooth feature to on or active, then in its Bluetooth menu, locate and press `Pair' or ‘Link’.
Some cell phones may ask for the eyewear’s pairing identity, code or key, before the pairing process can be completed. If asked, type in
‘0000’.
Most phones are then satisfied with the pairing identity, and ask you to ‘Pair?’ or `Link?’. Click ‘Yes’ on your phone. Then the phone and
your eyewear are paired, meaning they can communicate across a secure Bluetooth connection from that time forward. Your eyewear’s
blue light changes from continuously blue to blinking blue
Most phones then ask if you want to ‘Connect?’, so your eyewear and cellphone are not only paired, but are ready to communicate. Click
‘Yes’ and your eyewear is ready to receive continual voice communication and music from your phone.
To Next Page
Need help?
General
