Honeywell 13270-01LB User Manual

This manual covers a range of
conventional fire panel and include
system design, installation and
configuration information.
The fire panels covered are
designed in accordance with the
requirements of EN54 Part 2:1997
+ AMD 1 (and include optional
clauses 7.8, 7.10 & 7.11), plus the
requirements of EN54 Part 4:1997
+ AMD 1 and AMD 2.
This publication covers the
Conventional fire alarm panels:
q 1 zone panel:- 13270-01LB and
75585-01NMB
q 2 zone panel:- 13270-02LB and
75585-02NMB
q 4 zone panel:- 13270-04LB and
75585-04NMB
q 8 zone panel:- 13270-08LB and
75585-08NMB
q Fire alarm repeat panel:
13271-08LB and 75586-08NMB.
The panels are supplied without
batteries.
This manual is intended
for use by installers and
commissioning engineers.
A separate Operating
instructions and Log book
has been supplied along
with this booklet which
must be forwarded on to
the End User.
4188-424 issue 4_Part 1_10-09
Data, Installation and Commissioning guide
Fire Control and Repeat panels
(Conventional 1, 2, 4 and 8 Zone panel range)
Content Page
System design · · . . . . . 2
Cables - · · · · · . . . . . 4
Notes to installers . . . . . 5
Panel fixing· · · · . . . . . 6
Terminals · · · · . . . . . 8
Controls & indicators . . . . 9
Power up tests · · . . . . . 10
Installed system tests . . . 11
Config. considerations . . . 11
Access levels 2 · . . . . . 12
Operating instructions for
Access level 2 functions . . 12
Programming Options . . . 14
Operating instructions for
Access level 3 functions . . 14
Operating instructions for
Access level 4 functions . . 15
Fault indications · . . . . . 16
Fault finding · · · . . . . . 17
Specification for the
Control panel· · · . . . . . 20
Specification for the
Repeat panel· · · . . . . . 22
Parts list · · · · · . . . . . 23

Honeywell 13270-01LB Specifications

General

Brand	Honeywell
Model	13270-01LB
Category	Control Panel
Language	English

Summary

System Design

Controls and Indicators

Zone Status Indicators

Essential Controls

Describes the function of keypad, shift, display test, buzzer, reset, and alarm control buttons.

System Indicator Lights

Explains the meaning of system-wide indicators like Fire, Fault, Power, Test, and Delay.

Power Up Tests

Pre-Power Up Checks

Essential checks before applying mains power to the panel.

Initial Power Up Procedure

Step-by-step guide for powering up the system for the first time.

Zone and Sounder Circuit Tests

Procedures for testing zone and sounder circuits after initial power up.

Installed System Tests

System Configuration and Testing

How to configure the panel for testing and perform system tests.

Test Mode Operation

Explains Test modes A and B for fire detection simulation.

Configuration Considerations

Options for configuring repeat panels, delay modes, and false alarm rejection.

Access Level 2 Functions

Operating Instructions for AL2

Detailed steps for performing display tests, setting test modes, and managing zones.

AL2 Function Management

Sounder and Password Management

Programming Options

Access Level 3 Functions

Instructions for configuring various panel functions using AL3 access code.

Operating Instructions for Access Level 4 Functions

False Alarm Rejection and Repeat Panels

Configuration of false alarm rejection and setting the number of repeat panels.

Zone Configuration and Reset Options

Setting zone latching, reset silence, and sound/resound alarms.

Short Circuit and Reset Duration Settings

Configuring zone short circuit behavior and reset duration.

Fault Indications

Fault Diagnosis and Causes

Control Panel Indicator Lights

Fault Finding

Troubleshooting Flowchart

A step-by-step guide to diagnose system faults based on indicator status.

PSU Fault Indications

Main Panel PSU Faults

Repeat Panel PSU Faults

Earth Fault Indications

Main Panel Earth Faults

Repeat Panel Earth Faults

Specification for the Control Panel

Panel Specifications Overview

Comprehensive table detailing technical specifications for control panels.

Control Panel Power Supply Specification

Specification for the Repeat Panel

Repeat Panel Technical Specifications