Honeywell 1532 - Unlocking and Opening the Chest; Closing and Locking the Chest

3
1. Insert key into lock cylinder (Figure 1.1).
2. Turn the key counterclockwise to the left ¼ turn (Figure 1.2).
3. With key lock in the unlocked position, turn the knob to the right to the
unlatched position (Figure 1.3).
4. While holding the knob in the unlatched position, lift the lid to open
(Figure 1.4).
Note: The knob will return to the latched position when released.
WARNING:
To avoid possible injury, make sure hands or
fingers are clear before closing the chest lid.
Figure 2.1
Figure 2.4Figure 2.3Figure 2.2
WARNING: To avoid possible injury, make sure hands or fingers are clear before
closing the chest lid.
TO CLOSE THE CHEST
1. Carefully lower lid into the closed position and push it downwards to ensure
it is properly latched (Figure 2.1).
TO LOCK THE CHEST
2. Insert key into lock cylinder (Figure 2.2).
3. Turn the key clockwise to the right ¼ turn (Figure 2.3).
4. The Chest is now locked and you may remove the key.
UNLOCKING AND OPENING THE CHEST
CLOSING AND LOCKING THE CHEST
Figure 1.1 Figure 1.2 Figure 1.3 Figure 1.4