Honeywell 5 Nm Series MS3103J1030 User Manual

INSTALLATION INSTRUCTIONS
62-0274-07
3 Nm, 5 Nm Series Spring Return
Direct Coupled Actuators
MS3103, MS3105, MS4103, MS4105, MS7403, MS7405, MS7503,
MS7505, MS8103, MS8105
N314
MS3103, MS3105, MS4103, MS4105, MS7403, MS7405,
MS7503, MS7505, MS8103, MS8105 Spring Return Direct
Coupled Actuators (DCA) are used within heating, ventilating,
and air-conditioning (HVAC) systems. They can drive a variety
of quarter-turn, final control elements requiring spring return
fail-safe operation.
Applications include:
• Volume control dampers, mounted directly to the drive
shaft or remotely (with the use of accessory hardware).
• Quarter-turn rotary valves, such as ball or butterfly valves
mounted directly to the drive shaft.
• Linear stroke globe or cage valves mounted with linkages
to provide linear actuation.
• Available with cable on select models
SPECIFICATIONS
Models:
 See Table 1.
Device Weight:
 3.5 lbs (1.60 kg)
Ambient Operating Temperature:
 -40° to 150°F (-40° to 65°C)
 -22° to 150°F (-30° to 65°C) (Two position only)
Shipping and Storage Temperature:
 -40° to +150°F (-40° to +65°C)
1
Number represents range
2
2-10 Vdc
3
0/2-10 Vdc
Table 1. Models.
Power Supply
Model Number
Model Number
(including 3 ft. whip) Torque Voltage
VA
Driving
1
Drive
(sec) Control Input/Output Description
SPDT
Aux
Switch
MS3103J1030 27 lb-in
(3 Nm)
24 Vac/dc
@50/60 Hz +/-
20%
24Vdc+/-10%
6/3 90 Sylk-enabled 0
MS7403A2030
Floating, Modulating
2
,Three-Position, Feedback
0
MS7503A2030
Floating, Modulating
3
, and Feedback
0
MS7503A2130 1
MS8103A1030 45 Two-Position (SPST) 0
MS8103A1130 1
MS4103A1030 100-250 Vac
@50/60Hz
6/9 45 Two-Position (SPST) 0
MS4103A1130 1
MS3105J3030 44 lb-in
(5 Nm)
24 Vac/dc
@50/60 Hz +/-
20%
24Vdc+/-10%
6/3 90 Sylk-enabled (5 addresses & Analog Output) 0
MS3105J3130 1
MS7405A2030
Floating, Modulating
2
, Three-Position, Feedback
0
MS7505A2030 MS7505W2030
Floating, Modulating
3
, and Feedback
0
MS7505A2130 MS7505W2130 1
MS8105A1030 MS8105W1030 45 Two-Position (SPST) 0
MS8105A1130 MS8105W1130 1
MS4105A1030 100-250 Vac
@50/60Hz
6/9 45 Two-Position (SPST) 0
MS4105A1130 1

Honeywell 5 Nm Series MS3103J1030 Specifications

General

Brand	Honeywell
Model	5 Nm Series MS3103J1030
Category	Controller
Language	English

Summary

SPECIFICATIONS

Electrical Connections

Details the types and sizes of conductors for wiring connections.

Mounting

Explains the self-centering shaft adapter and its suitability for damper shafts.

Sylk™ Bus

Explains the Sylk bus communication protocol, its benefits, and wiring recommendations.

INSTALLATION

Location

Preparation

Determine Appropriate Mounting Orientation

Guides on setting the actuator's rotation direction for opening the damper.

Selecting Actuator Control Signal

Details how to select the desired control signal using the actuator's mode selection dial.

Non-Standard Stroke

WIRING

Typical Wiring Without Cables

Floating, Modulating, and Economizer Models

Typical Wiring With Cable

OPERATION

Actuator Override

Explains how to manually override the actuator's control signal for specific applications.

CHECKOUT

Modulating/Floating Operation

Details the checkout procedure for actuators operating in modulating or floating control modes.

Direct Checkout

Provides steps for verifying the correct operation of direct control actuators.

Two-Position Checkout

Outlines the procedure for checking the functionality of two-position actuators.

Sylk-enabled (S-BUS) Checkout

Explains how to test the operation of actuators connected via the Sylk-enabled S-BUS.