Honeywell Spyder 5 WEB-RxxN Series - User Manual

Spyder Model 5
WEB-RxxN ROOM CONTROLLERS
INSTALLATION GUIDE
® U.S. Registered Trademark
Copyright © 2019 Honeywell Inc. ▪ All Rights Reserved 31-00281-01 (EN1B-0664GE51 R0819)
GENERAL INFORMATION
Fig. 1. WEB-RxxN (without optional covers)
BEFORE INSTALLATION
IMPORTANT
It is recommended that the unit be kept at room
temperature for at least 24 hours before applying
power; this is to allow the evaporation of any con-
densation resulting from low shipping / storage
temperatures.
US requirement, only: This device must be installed
in a UL-listed enclosure offering adequate space to
maintain the segregation of line voltage field wiring
and Class 2 field wiring.
CAUTION
To avoid electrical shock or equipment damage, you
must switch OFF the power supply before attaching
/ removing connections to/from any terminals.
Table 1. Overview of models
OS no.:
power
supply
AOs
UIs
BIs
relays
(A
triacs
(B
total no.
of I/Os
remarks
large housing
(7-13/16 x 4-5/16 x 2-5/16)
(198 x 110 x 57.5 mm)
WEB-RL6N
24 VAC
6
10
0
4
4
24
72-hr data retention
small housing
(6-3/8 x 4-5/16 x 2-5/16)
(162 x 110 x 57.5 mm)
WEB-RS5N
24 VAC
4
4
0
4
2
14
24-hr data retention
(A
See also section “
Relay Current Limitations” on pg. 15.
(B
See also section "Triac Current Limitations" on pg. 12.
CPU: 32-bit MK24FN Freescale Kinetis Cortex M4

Honeywell Spyder 5 WEB-RxxN Series Specifications

General

Model	WEB-RxxN Series
Type	Controller
Network Interface	10/100 Mbps Ethernet
Enclosure Rating	IP20
Power Consumption	15 VA maximum
Communication Protocol	BACnet IP, BACnet MS/TP
Number of Inputs	Configurable
Number of Outputs	Configurable
Inputs	Universal (Analog/Digital)
Outputs	Universal (Analog/Digital)
Mounting Type	DIN rail
Storage Temperature	-40 to 70°C (-40 to 158°F)
Relative Humidity	5 to 95% RH, non-condensing
Humidity Range	5 to 95% RH, non-condensing
Communication Ports	RS-485 (for BACnet MS/TP), Ethernet
Certifications	CE, FCC