Need help?Do you have a question about the Honeywell UDC2500 and is the answer not in the manual?
General| Type | Universal Digital Controller |
|---|---|
| Alarm Relays | Up to 2 alarm relays |
| Communication | RS485 Modbus RTU |
| Mounting | Panel Mount |
| Display | Dual 4-digit LED |
| Input Types | Thermocouple, RTD, mA, V |
| Control Modes | On/Off, PID |
| Output Types | Relay, mA, V |
| Power Supply | 100-240 VAC, 24V DC |
| Dimensions | 96x96x132 mm |
Covers essential electrical considerations for wiring the controller, including line voltage and grounding.
Details the step-by-step procedure for changing configuration values using the controller's keys.
Explains tuning parameters like Gain, Rate, and Reset for controller optimization.
Manages automatic tuning (Accutune III) for PID parameters to optimize control loop performance.
Lists and explains diagnostic messages displayed by the controller to indicate malfunctions.
Details the step-by-step procedure for starting up and initializing the controller.
Details the Accutune III autotuning method for self-regulating and integrating processes.
Lists voltage, current, and resistance equivalents for 0% and 100% range values for calibration.
Details wiring procedures for Input 1 thermocouple connections using an ice bath.
Details the step-by-step procedure for calibrating Input 1, including 0% and 100% points.
Details the step-by-step procedure for calibrating Input 2, including 0% and 100% points.
To Next Page
