7 - 3
Tap Change Connection to change the current settings.
Connection Options Select this option to …
‘USB Establish a USB connection.
Communicating with the Optimus 5900 RFID Terminal
After setting up both the workstation and the terminal, ActiveSync connection should be automatic.
1. Connect the Optimus 5900 RFID terminal to a communication peripheral, such as the Optimus 5900
RFID eBase.
2. The Optimus 5900 RFID terminal automatically opens ActiveSync to establish a connection.
Synchronizing with the Host Workstation
After setup, synchronization begins automatically whenever the terminal’s mechanical connector
connects to a Optimus 5900 RFID peripheral that is connected to a host workstation with ActiveSync
installed.
Exploring the Terminal from the Workstation
When the terminal and desktop computer are connected, open the main ActiveSync window (on the
desktop), and click Explore.
To Next Page
Loading...
