7 - 7
4. Select the Profile tab and press Scan.
5. Select the appropriate SSID and select Configure. If the Active Profile does not appear, perform
the scan again by pressing Refresh.
6. Press Yes in response to “Create a new profile?.” The method used for inputting the network key
differs according to the encryption of the Active Profile to be set.
7. Once the Profile installation is complete, select Yes in response to “Commit changes?” prior to
selecting the Main tab.
8. If you change the Active Profile from the Main tab to the Active Profile just set, it is connected
automatically and the Status field indicates “Associated.”
To Next Page
Loading...
