Depository Safe
5
SECURE LOCKOUT PERIOD
If the wrong user code is entered into the keypad 3 consecutive times in a row, the keypad will
automatically go into lockout mode and you will not be able to open the safe using the digital keypad
for 15 minutes. During the lockout period entry can be made using the override access key.
LOST OR FORGOTTEN USER CODES
LOSS OF BOTH PRIMARY AND SECONDARY USER CODES
It is recommended that you record your new user codes in the “Digital User Code Record” section
on page 9 and keep this manual in a secure location away from the safe. However, If both the
Primary user code and Secondary user codes are lost, you may open the safe using the override
access key and use the red user code reset button to reprogram the 1-8 digit Primary user code
or Secondary user code. The instructions for opening the safe with the override access key are
located on page 4.
CARE AND MAINTENANCE
When properly maintained, your safe will continue to operate for many years. In order to ensure
optimum performance of your safe, please follow these simple precautions:
CLEAN HANDS - Never attempt to operate the digital keypad if your hands have excessive dirt, debris
or liquids on them.
CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g.,
window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER use
abrasive cleansers on the safe or digital keypad.
For future reference, store this Operation and Installation Guide in a secure area away from the safe.
DO NOT DISCARD!
To Next Page
Loading...
Need help?
General
