ADEMCO 6162RF Keypad / Transceiver – Installation and Setup Guide
Alphanumeric Addressable Keypad/Transceivers for use with Honeywell Control Panels; incorporates functions
of a High RF Receiver and a 5800 Transmitter module.
= READY to Arm
= NOT READY to Arm
= System ARMED
= System NOT ARMED
Arming Keys
4-Line Alpha Display
Custom Zone Designators
6162RF-KEYPAD-LBLD-07-18-13_1
Programmable Function Keys
Sounder
INSTANT
MAX
OFF
AWAY
STAY
NIGHT
TEST
BYPASS
CHIME
CODE
SETTINGS
Wall
Surface
Control Panel Terminal Strip
AU X DATA
IN
DATA
OUT
AUX
2
1
Y
G
To Control Panel
Terminal Strip
Optional Front Cover Securing Screw
(Required in European Installations)
Install Four (4)
Mounting Screws
Control Panel
1. OPEN
Keypad
Front Cover
2. WIRE
3. MOUNT
• Connect only one wire per terminal.
• For Daisy-Chain Configurations, use
wire splicing so only one wire is
connected to each terminal.
• Mount on drywall, or in
a single or double-gang
electrical box.
6162RF-installation-3-21-13
Black (Gnd)
Red (+12vdc)
Green (Data To Control)
Yellow (Data From Control)
To activate Function keys,
press and hold key for at
least 2 seconds; key pairs
are activated immediately.
PROGRAMMABLE
FUNCTION KEYS
A or
and
B or and
C or and
D
Note: See the control's instructions for
details on programming the Function
keys for panic alarms or other special
functions (i.e., macros).
• Supports wireless key transmitters
(e.g., 5834-4) and bi-directional
transmitters (e.g.; 5804BD,
5828/5828V).
• Supports wireless keys with high-
security (encryption) capability (e.g.;
5834-4EN).
• Provides a nominal range of 200
feet for RF transmitters (some
transmitters have a shorter range).
• Supports RF jam detection.
SETTINGS KEY FUNCTIONS
Settings Ke
Result
Press
Displays Settings Menu*:
1 Set Time/Date
2 View Event Log
3 Reboot Keypad
4 Set User Code**
* Follow instructions in the User Guide for these options; selecting
option 3 reboots the 6162RF keypad (the keypad beeps and the
ARM and READY LEDs flash for several seconds).
** Menu-Based User Code programming is available only on certain
controls. See the Control panel instructions for details.
To Next Page
Need help?
General