13 69-0563—2
Decide when you want the energy savings
period to start and insert a
blue
pin at the notch
that corresponds to this time. After the blue pin
engages, the furnace will be off until room
temperature drops to the energy savings
setpoint.
You can set both a day and night program.
See Fig. 5. for program examples.
Setting the Cooling Program
Decide when you want the temperature to
reach the comfort level. Find the notch on the
program dial that’s one-half hour before this
time and insert a
blue
pin. The half-hour head
start gives the air conditioner time to cool the
house before you wake up or arrive home.
Decide when you want the energy savings
period to start and insert a
red
pin at the notch
that corresponds to this time. After the red pin
engages, the air conditioner will be off until
room temperature rises to the energy savings
setpoint.
To Next Page
Loading...
Need help?
General
