BENDIX/KING KCS 55/55A
Rev 11, Apr/2007
©Honeywell International Inc. Do not print without express permission of Honeywell Page 1-13
H. The KA 51B Installation Kit 050-01928-0000 contains the following:
1.6 COMPENSATOR KIT (OPTIONAL)
Also available, is an optional Compensator Kit (050-01928-0001) for installations where the install-
er wishes to use a different switch/meter arrangement. The Compensator Kit PN 050-01928-0001
contains the following:
1.7 INSTRUCTIONS FOR CONTINUED AIRWORTHINESS
The instructions for continued airworthiness given in the TC or STC approvals for this product sup-
plements or supersedes the instructions for continued airworthiness in this manual.
Most Honeywell products are designed and manufactured to allow "on condition maintenance."
On condition maintenance is described as follows; There are no periodic service requirements
necessary to maintain continued airworthiness. No maintenance is required until the equipment
does not properly perform its intended function. When service is required, a complete perfor-
mance test should be accomplished following any repair action. Consult the appropriate unit
Maintenance/Overhaul Manual for complete performance test information.
PN Description Qty.
030-02421-0000 9 Pin Connector 1
030-02423-0000 5 Pin Connector 1
047-05759-0002 Mtg. Ring 1
047-05760-0002 Mtg. Plate 1
089-06163-0008 Scr., FHP #4-40 X 1/2 2
PN Description Qty.
030-02423-0000 5 Pin Connector 1
047-05760-0002 Mtg. Plate 1
200-02846-0000 Compensator Assembly 1
RELEASED FOR THE EXCLUSIVE USE BY: AIRCRAFT ELECTRONICS ASSOCIATION
UP536434
To Next Page