15 69-1513EF—01
12. Place one label next to the alarm and the
other label near a source of fresh air
where you plan to gather after the alarm
indicates the presence of carbon
monoxide.
Weekly Alarm Testing
Test the alarm each week to ensure the alarm is
operating correctly:
1. Push the test button until a short beep is
heard (within three seconds).
2. Release the test button.
3. Wait and observe during alarm test:
a. Red LED light flashes four to six
times.
b. Alarm sounds two patterns after test.
c. Alarm resumes normal operation.
Troubleshooting
See Table 1 for meaning of alarm LED and
beeping signals.
To Next Page
Loading...
