2
THANK YOU
Congratulations on your purchase of this versatile Honeywell Evaporative Air
Cooler and Heater. For optimum cooling & heating performance from your unit, fill
the water tank with water & ice (if available) to increase its cooling power and turn
off the Cool mode at least 15 minutes before you turn on the heater. The unit should
be positioned in a location that will create a Flow Through Air effect.The greatest
cooling effect will be felt if the unit is operated in a partly opened doorway or window.
Cooler Location - Indoors (Important - Please Read!)
Place the cooler in front of an open door or window. Ensure that there is adequate
cross - ventilation in the room by leaving a door or window open opposite the cooler.
Following these guidelines will ensure your cooler will work as effectively as possible.
Not an Air Conditioner (Important - Please Read!)
The evaporative air cooler is not an air conditioner as it does not use a compressor
or refrigerant gas. It should not be expected to cool as efficiently as a refrigerated air
conditioner.
To Next Page
Loading...
Need help?
General
