CK65 Mobile Computer 11
• Do not modify the battery or attempt to insert foreign objects into it.
• Do not solder directly to the battery contacts.
• Do not drop the battery or apply mechanical shocks or pressure to it.
• Do not disassemble or open, crush, bend or deform, puncture, shred or burn the
battery.
• Do not immerse the battery pack in water or get the battery pack wet before
proper installation in the computer.
Enable Airplane Mode
If you do not need to connect to any wireless networks, you can enable Airplane
mode to turn Off the radios and save battery power.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Network & Internet.
3. Tap the toggle button next to Airplane mode. An airplane icon appears in the
status bar to indicate Airplane mode is turned On.
Power On the Computer
After you have fully charged and installed a battery, power on the computer for the
first time:
•Press and hold the Power button for approximately 3 seconds, and then release
the button.
Welcome Screen
The first time you power on the computer, a Welcome screen appears. Select a
language and then tap Start. You can either scan a configuration bar code or select
manual to set up the computer. To learn more about how to Scan Bar Codes, see
page 41.
During the manual setup process, follow the prompts on the screen to:
• Set up the Wi-Fi network connections.
• Set the time, date, and time zone, if no Wi-Fi connection is available.
• Personalize (name) the computer.
• Set up security and privacy options.
To Next Page
Loading...
